422 W. Meats Ave., Orange, CA 92865
714-282-0900

http://www.bedrockstonefab.com




Showing posts with label fabrication. Show all posts
Showing posts with label fabrication. Show all posts

Friday, August 13, 2010

HOW TO DESIGN A STONE FIREPLACE

With Fall just around the corner, Bedrock customers are starting to ask about updating their fireplaces. There is nothing more elegant and beautiful than a natural stone fireplace which is why we cover this blog topic a lot. If you are thinking that your fireplace could use some sprucing up, or you have the perfect spot for one and are ready to get started in time for the holidays, consider these important points:

What's Your Style? Contemporary, Rustic, Traditional? Start identifying the look that would work best in your home. Do you want a floor to ceiling fireplace? Will you be displaying lots of photographs? Cut out photos and you will see a theme emerge.

What is going to be your heat source? You have three choices which include masonry, gas or electric.

What size fireplace are you looking for? Will it heat a large room or just a small dining area? The average heating unit ranges from 32" to over 42" wide and up to 36" tall.

What is the size of the room the fireplace will be in? Consider the ceilign height and wall width. Also, keep in mind window placement, cabinets and furniture in the room.

What material would best suit the design of the room? Travertine looks beautiful for an old world or rustic look. Granite for classic or modern. Marble works for traditional, elegant rooms.

Anyway you fabricate it; a natural stone fireplace will add value and beauty to any home.

Thursday, July 15, 2010

IT'S NO MYSTERY

If you are in the middle of updating your home, there is so much of the construction process that can seem like a mystery! You are doing everything you can do just to pick out the right material, then your contractor keeps throwing out terms like templates, edge profiles, fabrication....it can be very overwhelming if you have never done it before. Following is a quick course on countertop selection and installation:

1. Measure Up! Your Bedrock designer will come by your home and measure your countertop or review your plan so we know exactly how many slabs will need to be purchased.

2. Select your granite. This can either be fun or frustrating. Get help from your Bedrock or Rite-Loom designer. They will take you through the process so you can select just the right slab for your project and select your edge detail (what the edge of the countertop will look like when it is finished)

3. A representative from Bedrock will then come to your home and create a template that they can bring back to the shop and use to fabricate/cut the stone. This template is laid on to the granite slabs you have selected, then is traced for the fabrication process.


4. The installers come to your home and remove the old countertop. They also disconnect and remove the old plumbing, sink and backsplash.

5. A plywood underlayment will be installed to insure that the slab is level.


6. Now, here comes your granite! Once just a large piece of raw stone, it is now a 600 pound beautiful countertop!

7. The installers will put the slabs and backsplashed in place, then seam the pieces together.

8. They will then place your sink and other plumbing fixtures in place. Your plumber will attach the equipment.

9. Bedrock will then seal your countertop. This will protect the material against stains or stratches.

10. ENJOY your beautiful new kitchen.